At the present time, there are a few routers that are experiencing signal interruptions as well as red LED light blinking problems. Arris routers are one of these routers. The red light is an indication of a problem with your internet connection. If you are also facing an Arris router red light issue, but don’t know how to fix it, read this blog carefully.
Let’s have a glance at the troubleshooting steps given below that will enable you to fix the Arris router blinking red light issue.
Arris Router Red Light: What Does It Mean?
Most of the time, the router’s lights are either blinking, off, or solid. The same is true with Arris routers. Arris router internet light red means that you don’t have an internet connection. In addition to this, there are a few more reasons responsible for the Arris router showing a red light. It includes-
- Arris router is experiencing an overload
- Outdated firmware of the router
- A technical bug or malware in the network
- The router is not receiving any signal from the modem
- Loose or broken cables
Tips To Troubleshoot Arris Router Red Light Issue
If your Arris router blinks a red light, or you are not getting an idea how to fix it, here are a few effective as well as tried-and-true solutions that will definitely work for you. Let’s have a glance at these tips as they will help you out in getting to the bottom of the mysterious red light of your Arris router.
Power cycle your router
The red light on Arris router can be the outcome of the temporary slow speed of the internet. But, power cycling is the best solution for that. To prevent your router from blinking red, power cycle it.
To begin with, unplug the Ethernet cables and power cables, and after waiting for a minute re-plug them. Wait for 30 seconds, until your router reboots. This way, you can definitely solve the Arris router blinking red light issue.
Check cables
Sometimes the problem is with the wires connected to your router. Due to this, your router can blink red. Wires can be torn, old, and bent out of shape. It results in the loss of the connection. So, it is a must for you to check the wires thoroughly. In addition to this, you also check if there is any damage in the ports.
Inspect the pins on the router
You can start by inspecting if there is any pin in the middle of the cable that may cause interruption. Verify if the connectors of the Ethernet cables are made of plastic ends which are susceptible to damage. So, replace the cables as soon as possible that are already burnt, rusted, and damaged.
Verify the internet outage status
In many cases, it happens that the issue is not with your router but with the internet service provider. If you are experiencing an internet outage, it will be best for you to call the support team. Plus, you can also check for an update on the outage status page.
Reduce the number of connected devices
Check if the data is traveled through more devices or more users that the router can not accommodate. As a result, due to overloading, there is the possibility of connection issues & red light. To resolve the Arris router blinking red light issue, make efforts to reduce the number of connected devices. Furthermore, you can also make changes in the password to avoid unknown devices getting connected to your router.
Check if the router is overheated
Verify if your router is overheated as it may cause several issues such as slow speeds, dropped connection, and many more. To save it from being overheated or keep it cool, clean all the debris or dust clogging your router’s vents. It may help you improve the airflow and prevent it from being overheated. This way, you can prevent your Arris router red light issue.
Reset your router
In case, none of the above troubleshooting tips work, it is best to restore the Arris router to its factory settings. It is the perfect way to fix the Arris router internet light red issue. Check if your router is properly configured or not. If not, it causes a red light to show up.
Ultimately, resetting the Arris router is a golden opportunity to prevent your Arris router from blinking red light. To proceed with the resetting process, locate the reset button on your Arris router. Press this button with the help of a paperclip or pin. Hold this button for a few seconds. Release the Reset button. Wait patiently until it reboots.
Contact Arris’s customer support
If you are facing difficulties or are frustrated with all the troubleshooting methods mentioned above, reach out Arris Supportive team. Its many years of experience technicians will help you in diagnosing the Arris router red light issue as well as offer you proper guidance. Reach out to Arris’s customer support and personalized help via their website or contact no.
Bottom-line
Last but not least, by following the tips above-mentioned you will surely be able to fix the Arris router red light issue. While trying these solutions, you have to make sure that you are not applying all of them at a time. Instead of doing so, you must provide your Arris router with enough time to fix a few more issues with your internet connection. In case, have any trouble with your Arris router, call us! We assure you that we will solve all of your issues.
FAQs
How often can I reboot my router?
In case, you find an internet outage or notice a poor internet connection, it will be best for you to reboot your router. Except from that, you can also unplug the power cord as well as reboot the router once a month.
How can you reset your router?
To initiate your router’s reset process, you have to unplug its power cable, Ethernet cable, and other cables it is connected with. Afterward, wait for just a minute and then proceed to plug all things back in.
What your router might not be working?
There are various reasons responsible for your router not working. Besides, it also has LED lights- Red, Blue, and green that blink to indicate that there is some issue with your router. The red light on Arris router is also one of the main causes of not working your Arris router. It means that your device is having trouble connecting to the router.